LGA50D Series

The LGA50D is a non-isolated DC-DC converter that is designed for cost and space sensitive applications.

This non-isolated unit offers two independent and configurable 25 amp, 50 watt outputs, which can also be combined to a single configurable 50 amp, 100 watt output. With a footprint of 1 x 0.5 inches or 25.4 x 12.5 mm.

The module offers two independent and configurable 25 amp, 50 watt outputs, which can also be combined to a single configurable 50 amp, 100 watt output. You can generate higher current rated rails by connecting up to 4 units in parallel so that up to 200 amps can be supplied as a single power rail.

The input voltage and output voltage specifications remain the same in any configuration, so the input is defined as 7.5 V to 14 V and the output voltage can always be adjusted within the range of 0.6 V to 5.2 Vdc at a maximum efficiency of 95.5% by either PMBus or via external resistor configuration.

The LGA50D is a unit that has 3 different form-factors, including a low-profil version. They are applied in applications by surface mount technology via either block-pin or LGA terminations and can withstand reflow oven temperatures and is supplied in tape-and-reel packaging for simplest production management.

Visit LGA50D Demo Kit Series page Datasheet Brochures Press Releases Technical Documentation Print this page Technical Videos
  • Total Max Power:
    100 W
  • Total Max Current:
    50 A
  • Input Voltage:
    7.5 V to 14 V
  • Output Voltage:
    0.6 V to 5.2 V
  • Outputs:
    Dual
  • Size (L x W x H):
    1.000" x 0.500" x 0.500"
  • Warranty:
    2 years
  • Operating Temperature:
    -40 to +85 deg C

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Isolation
  • Other
  • Control: Digital control by PMBus
  • MTBF: 50M hours (SR-332, iss-3, method 1, case1)
  • Input voltage : 7.5Vdc to 14Vdc
  • Power: 100W maximum
  • Output voltage: 0.6V to 5.2V JJ and JSBJ version
  • Output voltage: 0.6V to 3.3V JLPJ version
  • Output: 50A in Single O/P config
  • Output: 25A per channel in Dual O/P config
  • Control: resistor control and configuration
  • Isolation: Non-isolated
  • Mechanical: LGA termination (JSBJ and JLPJ versions)
  • Mechanical : 1inch by 0.5inch by 0.5inch (JJ version)
  • Mechanical : 1inch by 0.4inch by 0.5inch (JSBJ version)
  • Mechanical : 1inch by 0.4inch by 0.5inch (JSBJ version)
  • Mechanical : 1inch by 0.21inch by 0.5inch (JLPJ version)
  • Mechanical: Block pin termination (JJ version)
  • Mechanical: LGA termination (JSBJ and JLPJ versions)
  • Efficiency: 95.5% (at 5V output)
  • Switching frequency: 457Khz per phase nominal
  • Warranty: 2 years
  • Ambient Temperature: -40 to +85 degC
  • 100W Point of Load converter
  • Dual or single output configuration possible
  • High efficiency up to 95.5%
  • Small size 1” x 0.5” x 0.48” (LxWxH)
  • Supports PMBus
  • No minimum load requirement
  • Wide operating temperature range
  • Exceptional power density
  • Excellent transient response
  • Analog or digital control
  • IPC9592B compliant
  • Tape and reel packaging
  • Reflow compatible
  • Possible to stack up to 8 phases (4 units) for 1 rail of 200 A
  • Two year warranty
  • Evaluation kit is available

让我们帮助您选择合适的产品

按要求新建搜索

Corporate website design by Freshleaf Media

Sales Support
☒ Close