ADQ800 Series

800 Watts 1/4 brick

ADQ800 series quarter-brick (ADQ800-48S12B-4L) isolated DC-DC converter produces a single fully regulated 11.8 V output. Rated at 800 watts, this converter can deliver up to 70 amps output current and has no minimum load requirement. It has an input voltage range of 40 to 60 V and is primarily designed for use with standard 48 V supplies in computing and server applications, as well as regulated 48V supplies in communications equipment.

ADQ800-48S12B-4L has an ultra high efficiency of typically 96% at full load and can operate over an ambient temperature range of -40 to +85˚C, making it an ideal choice for the isolated converter in a distributed power architecture supplying power to non-isolated converters. The aluminium baseplate structure is available for enhanced thermal performance. The conversion technology employs 175 kHz fixed frequency switching to help minimize external EMI filtering requirements.

Standard protection features are input under voltage, overvoltage lockout, output overvoltage, output overcurrent and over temperature conditions. ADQ800-48S12B-4L has an enhanced pre-bias start-up capability and for high current applications two converters can be connected in parallel, automatically using the droop method of current sharing.
ADQ800-48S12B-4L is a low profile unit that is the ideal choice for demanding inter-board spacing requirements; the baseplate version requires only 0.53 inch (13.6 mm).

Datasheet Press Releases Technical Documentation Print this page
  • Total Max Power:
    800 W
  • Total Max Current:
    70 A
  • Input Voltage:
    40 V to 60 V
  • Output Voltage:
    11.3 V to 12.3 V
  • Outputs:
  • Size (L x W x H):
    2.300" x 1.450" x 0.530"
  • Warranty:
    2 years
  • Operating Temperature:
    -40 degC to +85 degC

Electrical Specifications

  • Input
  • Output
  • Other
  • Input Range: 40-60 VDC
  • output voltage: 11.8 Volts
  • Output current: 70 A
  • output power: 800 W
  • output : SINGLE
  • Warrant: 2 years
  • operating temperature: -40 to +85 ˚C
  • 5.0V/3.3V dual outputs
  • Enable (on/off)
  • Output loadsharing
  • Industry standard pin-out
  • Trim feature, both rails
  • 100°C Baseplate temperature
  • Unencapsulated 2.3" x 2.4" x 0.50" pkg.
  • 48VDC Input
  • Thermal protection



Corporate website design by Freshleaf Media

Sales Support
☒ Close