LGA80D Series Digital Dual Output Non-isolated Converter

Request a Sample / Buy Now
LGA80D
 

LGA80D NON-ISOLATED DC-DC CONVERTER

LGA80D Demonstration Video

Product Training Module
Visit LGA80D Demo Kit Series page

LGA80D Product Brochure

LGA80D brochure

The LGA80D is a non-isolated DC-DC converter that is designed for cost and space sensitive applications.

This non-isolated unit offers two independent and configurable 40 amp, 100 watt outputs, which can also be combined to a single configurable 80 amp, 200 watt output. With a footprint of 1 x 0.5 inches or 25.4 x 12.5 mm.

The module offers two independent and configurable 40 amp, 100 watt outputs, which can also be combined to a single configurable 80 amp, 200 watt output. You can generate higher current rated rails by connecting up to 4 units in parallel so that up to 320 amps can be supplied as a single power rail.

The input voltage and output voltage specifications remain the same in any configuration, so the input is defined as 7.5 V to 14 V and the output voltage can always be adjusted within the range of 0.6 V to 5.2 Vdc at a maximum efficiency of 95.5% by either PMBus or via external resistor configuration.

The LGA80D is a unit that is applied in applications by surface mount technology via its block-pin terminations and can withstand reflow oven temperatures and is supplied in tape-and-reel packaging for simplest production management.

LGA80D Datasheet(s)

Datasheet Press Releases Technical Documentation Print this page

让我们帮助您选择合适的产品

  • Total Max Power: 200 W
  • Total Max Current: 80 A
  • Input Voltage: 7.5 V to 14 V
  • Output Voltage: 0.6 V to 5.2 V
  • Outputs: Dual
  • Size (L x W x H): 1.000" x 0.500" x 0.500"
  • Warranty: 2 years
  • Operating Temperature: -40 degC to +85 degC

Electrical Specifications

  • Input voltage : 7.5Vdc to 14Vdc
  • Power: 200W maximum
  • Output voltage: 0.6V to 5.2V
  • Output: 80A at Single O/P config
  • Output: 40A per channel in Dual O/P config
  • Control: resistor control and configuration
  • Control: Digital control by PMBus
  • Isolation: Non-isolated
  • Mechanial: 1inch by 0.5inch by 0.5inch
  • Mechanical : Surface-mount reflow compatible unit
  • Packaging: Tape and reel packaging
  • Mechanical: Block-pin terminations
  • MTBF: 50M hours (SR-332, iss-3, method 1, case1)
  • Efficiency: 95.5% (at 5V output)
  • Switching frequency: 457Khz per phase nominal
  • Warranty: 2 years
  • Ambient Temperature: -40 to +85 degC
  • 200W Point of Load converter
  • Dual or single output configuration possible
  • High efficiency up to 95.5%
  • Small size 1” x 0.5” x 0.48” (LxWxH)
  • Supports PMBus
  • No minimum load requirement
  • Wide operating temperature range
  • Exceptional power density
  • Excellent transient response
  • Analog or digital control
  • IPC9592B compliant
  • Tape and reel packaging
  • Reflow compatible
  • Possible to stack up to 8 phases (4 units) for 1 rail of 320 A
  • Two year warranty
  • Evaluation kit is available