MP4 Series

400–600 Watt Configurable AC-DC Power Supplies

The MP4 series is an AC input to DC output configurable power supply system that offers five slots for single, dual or triple output modules ranging from 2 V to 60 V. Outputs can be connected in parallel or series to obtain thousands of output combinations. Capable of delivering up to 600 watts and with up to 15 isolated outputs, the MP4 series is an extremely flexible and versatile multi-output power solution. Standard features include remote sense on all outputs rated at 2 amps and above, current sharing on all outputs rated at 10 amps or greater and remote voltage adjustment on all outputs. Numerous options include a VME timing and system DC OK module, and a low leakage version for medical applications.

Datasheet Press Releases Technical Documentation Print this page
  • Total Max Power:
    600 W
  • Total Max Current:
    120 A
  • Input Voltage:
    85 V to 264 V
  • Output Voltage:
  • Outputs:
  • Size (L x W x H):
    10.000" x 5.000" x 2.500"
  • Warranty:
    2 years
  • Operating Temperature:
    -20°C to +70°C

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Isolation
  • Input Range: 85-264 VAC; 120-350 VDC
  • Frequency: 47-440 Hz
  • Inrush Current: 40A Peak (Soft Start)
  • Efficiency: 80% typical depending on Configuration
  • Power Factor: 0.99 typ @ full case load
  • Turn-on Time: AC 1.5 sec; Inhibit 150mS
  • Leakage Current: 2.0mA
  • Hold-up: 20 mS min
  • Internal Fuse Rating: 10A
  • Adjustment Range: +/-10% minimum on all outputs
  • Margining: +/- 4-6% of nominal
  • Overall Regulation: 0.4% or 20mV max
  • Ripple: 0.1% RMS; 1.0% P-P @ 20MHz limit
  • User Interface: ACOK; DCOK; Inhibit; V-Program; Sense
  • Safety: Per EN60950
  • Current Share on all outputs greater than 10A
  • Remote Sense on all outputs greater than 2A
  • Overload Protection on all outputs
  • Voltage Adjustment on all outputs (min +/-10%)
  • Margin and Remote Voltage Programming
  • Global DCOK and Inhibit/Enable
  • Module DCOK and Inhibit
  • ACOK signal
  • Field Replacable fan
  • Isolated 5V @ 1A Standby Output
  • Active PFC
  • EMI Conducted and Radiated to Class B
  • Optional VME Timing and System DCOK/Reset Module
  • Optional extra hold-up module
  • Field Demonstrated MTBF to 550K Hours



Corporate website design by Freshleaf Media

Sales Support
☒ Close