SIL60C2 Series

Active

240 W (60 A) Non-Isolated DC-DC Converters

The SIL60C2 series 60 A non-isolated DC-DC converter is designed for cost- and space-sensitive applications. It is available in a through-hole vertically mounting configuration with dual rows of pins. The converter accepts a wide range 4.5 to 13.8 VDC input and provides an output that is adjustable from 0.8 to 4.0 VDC to accommodate a wide variety of silicon power needs. Rated at 240 W, the SIL60C2 is capable of delivering up to 60 A; it has a typical efficiency of 89% and no minimum load requirement. Standard features include differential remote sense, remote On/Off and remote ‘power good’ indication. This converter also supports phase shedding to save power under light load conditions, and its output voltage can be adjusted to within 1% by a 2-bit VID signal.

特点

2 bit VID adjustable output voltage
Operating ambient temp up to +70°C with suitable derating and forced air cooling
0 A minimum load
EU directive 2002/95/EC compliant for RoHS

益处

Phase shedding for power saving during light loads
High power density design means reduced board space requirement
Power good output signal
Remote ON/OFF (active high)
Input under-voltage lockout

规格

输出功率（瓦）:	240
长度（英寸）:	1.98
宽度（英寸）:	0.78
高度（英寸）:	0.54
安装类型:	BMP; Through Hole
最小输出电流 (A):	0
最大输出电流 (A):	60
输出电压范围 (V):	0.8V to 4V
最小输出功率（瓦）:	0
最大输出功率（瓦）:	240
最大输入电压 (V):	13.8
保修期（年）:	2