PTH05010 Series

54 Watt (15 Amp) Non-Isolated DC-DC Converters

The PTH05010 series non-isolated DC-DC converter complies with the Point-of-Load Alliance (POLA) standard. It offers some of the most advanced POL functions in the industry, including Auto-Track™ sequencing for controlled power-up/power-down of complex semiconductor devices such as DSPs, FPGAs and ASICs, and voltage margining. Standard features include pre-bias startup, input undervoltage lockout, remote sense, remote On/Off and auto resetting short-circuit protection.

PTH05010 series converters have an input voltage range of 4.5 to 5.5 Vdc and an output voltage that can be trimmed from 0.8 to 3.6 Vdc to meet a wide variety of semiconductor power needs. Rated at 54 watts, the converters offer up to 95% efficiency and can deliver up to 15 amps. Available in through-hole horizontal mount and surface-mount versions, they have a small 0.62 x 1.37 inch (15.7 x 34.8 mm) footprint and an installed height of just 0.35 inch (9 mm).

Auto-Track™ is a trademark of Texas Instruments

Datasheet Technical Documentation Print this page
  • Total Max Power:
    54 W
  • Total Max Current:
    15 A
  • Input Voltage:
    4.5 V to 5.5 V
  • Output Voltage:
    N/A
  • Outputs:
  • Size (L x W x H):
    1.370" x 0.620" x 0.350"
  • Warranty:
    2 years
  • Operating Temperature:
    -40°C to +85°C
  • 5.0V/3.3V dual outputs
  • Enable (on/off)
  • Output loadsharing
  • Industry standard pin-out
  • Trim feature, both rails
  • 100°C Baseplate temperature
  • Unencapsulated 2.3" x 2.4" x 0.50" pkg.
  • 48VDC Input
  • Thermal protection

让我们帮助您选择合适的产品

按要求新建搜索

Corporate website design by Freshleaf Media

Sales Support
☒ Close