Advanced Energy's Artesyn LGA110D power supply features
a 7.5 to 14 VDC input voltage range and 350 W output power
rating. It is a new design of high performance non-isolated
DC-DC converter focused at providing low-voltage and
high current power conversion in a unit that can be used
in multiple different modes and combinations. The unit
has a 2-phase design which can be employed separately
creating 2 output voltages, or they can be combined to
create a single output voltage. Up to 4 modules can be used
in such a way resulting in a single output of up to 440 A
being created from 1 part number. The operational features
include remote On/Off, variable output voltage as well
as overcurrent protection, over-voltage protection, and
over-temperature protection with control functions being
provided by either pin-strap resistors or PMBus control for
digital communications.

技术数据表 产品手册 新闻稿 技术文档 打印此页 技术视频
  • 最大总功率:
    350 W
  • 最大总电流:
    110 A
  • 输入电压:
    7.5 V to 14 V
  • 输出电压:
    0.5 V 至 5.2 V
  • 输出路数:
  • 尺寸(长 x 宽 x 高):
    1.000" x 0.500" x 0.500"
  • 保修期
    2 years
  • 工作温度:
    -40 +85

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Isolation
  • Other
  • Input voltage: 7.5V to 14V
  • Output: 110A Single O/P config
  • Output: 55A per channel in Dual O/P config
  • Power: 350W
  • Output voltage: 0.5V to 5.2V
  • Control: Resistor control and configuration
  • Control: Digital control by PMBus
  • Isolation: Non-isolated
  • Mechncial dimension: 27mm by 12.8mm by 14mm
  • Mechanical mounting: Surface mount reflow compatible
  • Packaging: Tape-and-reel packaging
  • Efficiency: 96.5% max peak efficiency
  • Switching Frequncy: 457Khz per phase
  • Warranty: 2 years
  • Ambient Temperature: -40 to +85degC
  • 2 phase design
  • DUAL OR SINGLE output configuration possible
  • Stacked module array (up to 4 units) with any combination of phase
  • configurations
  • High efficiency up to 96%
  • Small size: 27.5mm * 12.8mm * 13.4mm
  • No minimum load requirement
  • Wide operating temperature range
  • Exceptional power density; 220A/sq-inch
  • Analogue or Digital control
  • Support 1 to 8 phases of multiphase configuration up to 40 combinations with 1 to 4 modules
  • IPC9592B compliant
  • Tape and reel packaging
  • Reflow compatible
  • Possible to stack up to 4 for 440A
  • I-mon and T-mon supported
  • Block-pin termination
  • Automatic loop compensation



Sales Support
☒ Close