.svg){kind=logo}
Artesyn™
Intelligent Transfer Switch
Active
Up To 24000 W
Advanced Energy's Artesyn Intelligent Transfer Switch (iTS™) is designed for any application needing power switched to different loads during a 24 hour period (i.e. Horticulture, Burn-in, Test and Measurement, etc.). Advanced Energy’s Intelligent Transfer Switch has a built-in PSU to supply power to the relays and MCU module. It is designed to operate with 2 phases of a 3-PH input mains up to 480 VAC nominal, or standard Phase and Neutral of single-phase mains.
特点
- 100% digital control
- 5 years manufacturer's warranty
- Designed for use with iHP and LCM4000 product families
- Digital communication via RS485 (ModbusRTU)
- Modular 8 channel A:B switch
- MTBF 400K hours per Telecordia SR332 Method 1 Case 4, Part Stress
- Standard 19" rack
- Up to 16 racks are addressable from one control node
- Input Voltage - Control 186-480 Vac Nominal; 1 or 2 phase
- Input Voltage - Relay Module 250V nominal contact rating per module
- Input Current - Relay Module 25A max contact rating per module
- Input Frequency - Control 50/60 Hz Nominal
- # of Relay Modules Up to 8
- Relay Coil from Control 12Vdc @ 1A for up to 8 relay modules (96W max)
- FAULT_1 (OUTPUT) Low asserted to trigger fault if coil voltage >5V
- FAULT_2 (OUTPUT) Low asserted to trigger if outputs A and B active
- EMC/IMMUNITY EN61000-4-X (see datasheet)
- Primary-to-EARTH 2500Vdc
- Primary-to-Secondary 2500Vdc
- Secondary-to-Earth 2500Vdc
- 19 changeable from front to back
益处
- Cloud based User configurable GUI
- Configurable baud rate
- Field upgradeable firmware
- Intelligent zero current switching when used with Artesyn devices
- Natural convection cooled (No Fan)
- Reversable mounting tabs
- PRESENT (OUTPUT) Low asserted if relay module present
- Drive_A (INPUT) High asserted to drive relay to A position
- Drive_B (INPUT) High asserted to drive relay to B position
- SGND (OUTPUT) Digital ground reference for MCU
规格
| 输出功率（瓦）: | 24000 |
|---|---|
| 长度（英寸）: | 12.6 |
| 宽度（英寸）: | 17.6 |
| 高度（英寸）: | 3.15 |
| 安装类型: | Configurable |
| 最小输出电流 (A): | 0 |
| 最大输出电流 (A): | 200 |
| 最小输出功率（瓦）: | 0 |
介绍 ConfigPro
先进能源公司革命性的在线电力配置器
该电源解决方案算法拥有 300 多万种可配置电源组合，可优化成本并指导您找到 MP、IMP、IVS 和 MICROMP (UMP) 可配置电源系列的理想解决方案。
开始
