200 Watt Eighth-Brick Isolated DC-DC Converters
The AVO200 series of eighth-brick isolated DC-DC converters comprises two single output models offering fully regulated voltages of 5.0 V or 12 V. These converters are rated at 200 watts continuous power; the 5.0 V model can deliver up to 40 amps, while the 12 V model can deliver up to 16.7 amps. They have a wide 2:1 input range of 36 to 75 Vdc and are primarily designed for use with standard 48 V telecommunications equipment supplies. Typical applications include wireless, optical or access networks, as well as server and computing infrastructures.
AVO200 series converters offer up to 94.5% efficiency at full load and can operate over an ambient temperature range of -40 to 85˚C. Their open-frame design is optimized for forced air or conduction cooling and an aluminum baseplate option is available for enhanced thermal performance. There is a choice of surface-mount or through-hole terminations. The conversion technology employs 150 kHz fixed frequency switching to help minimize external EMI filtering requirements.
Standard features include 80 to 110% output voltage trim, remote enable, input undervoltage lockout and differential remote sense. The converters have an enhanced pre-bias start-up capability and can accommodate high capacitance loads. They are comprehensively protected against overcurrent, short-circuit, overvoltage and overtemperature conditions. AVO200 series converters are low profile units that are ideal for systems with demanding inter-board spacing requirements; the open-frame models have an installed height of 0.38 inch (9.6 mm), while the baseplate versions require 0.5 inch (12.7 mm).
36 V to 75 V
4 V 至 13.2 V
尺寸（长 x 宽 x 高）：
2.300" x 0.900" x 0.500"
-40 to +85degC
- Logic Control
- Input: 36 - 75V
- Output: 12V at 17A
- Output: 5V at 40A
- Output: 200W
- Enable Logic: Positive or Negative enable
- Isolation voltage: 1500V
- Insulation : Basic insulation
- Mechanial: Baseplate or open frame
- Mechanical: 1/8th brick footprint
- 12V at up to 17A, 200W
- 5V at up to 40A, 200W
- 94.5% efficiency
- 80% to 110% output voltage trim range
- remote sense and enable function
- baseplate or open fram construction
- SMT or PTH termination options available.
- Basic insulation, 1500V isolation