iVS8 Series

4920 Watt Configurable AC-DC Power Supplies

The iVS8 series is a 3-phase AC input to DC output configurable power system consisting of a microprocessor-controlled PFC front end providing 14 individual slots that accept intelligent DC-DC converter modules with single, dual or triple outputs ranging from 2 V to 60 V. Single output modules come in four power ranges that can be mixed and matched and connected in parallel or series to obtain thousands of output combinations customized to any application. User-configurable functions include current limit and output sequencing, as well as input and output OK signals and indicators. Capable of delivering up to 4,920 watts and with up to 42 isolated outputs, the iVS8 series carries full medical safety approvals and is an extremely flexible and versatile multi-output power solution.

These digitally controlled power supplies feature a PMBus™-compliant I2C serial interface that enables parameters such as the voltage, current limit and enable/inhibit status of individual outputs to be programmed via an intuitive user GUI. The serial interface also allows remote monitoring of voltage, current and temperature.

iVS Software Package

技术数据表 Press Releases 技术文档 打印此页
  • 最大总功率:
    4,920 W
  • 最大总电流:
    970 A
  • 输入电压:
    170 V to 264 V
  • 输出电压:
    N/A
  • 输出路数:
  • 尺寸(长 x 宽 x 高):
    11.000" x 8.000" x 5.000"
  • Warranty:
    3 years
  • 工作温度:
    -40°C to +70°C

Electrical Specifications

  • Input
  • Output
  • Logic Control
  • Isolation
  • Other
  • Input Range: 170-264 VAC 3-Phase
  • Harmonic Distortion: Meets EN61000-3-2
  • ACOK: >5mS early warning
  • Holdover Storage: 10 mSec min
  • Radiated EMI: CISPR 22/EN55022 Level B
  • Leakage Current: 500uA Max
  • EMI Filter: CISPR 22/EN55022 Level B
  • Turn-on Time: AC 1.5 sec; Inhibit 150mS
  • Power Factor: 0.99 typ @ full case load
  • Efficiency: 85% typical depending on configuration
  • Inrush Current: 40A Peak (Soft Start)
  • Frequency: 47-440 Hz
  • Reverse Voltage Protection: 100% of rated output
  • OVP: Programmable
  • OCP: Programmable
  • Recovery Time: To within 1% in <300uSec
  • Dynamic Response: <2% or 100mV, 25% load step
  • Ripple: RMS 0.1%; P-P 1.0% to 20MHz
  • Overall Regulation: 0.4% or 20mV max
  • Adjust Range: +/-10% Manual; Full Range Programmable
  • Factory Set Point Accuracy: +/- 1%
  • Programming Accuracy: +/- 5%
  • Margining: +/-4-6% of Nominal
  • DCOK: +/-5% of nominal - Programmable
  • Single Wire Parallel: Share within 2% of total rated load
  • Thermal Protection: OTP/OTW Programmable
  • Remote Sense: Compensates up to 0.5V
  • Output/Output Isolation: >1 Megohm, 500V
  • Safety: Meets EN60950 and EN60601
  • Module Switching Frequency: 250kHz accepts external sync signal
  • Full Medical Approval
  • Intelligent I2C control
  • Current Share on all outputs greater than 10A
  • Remote Sense on all outputs greater than 2A
  • Overload Protection on all outputs
  • Voltage Adjustment on all outputs (Manual or Programmable)
  • Margin and Remote Voltage Programming
  • Global DCOK and Inhibit/Enable (Logic Programmable)
  • Module DCOK and Inhibit (Logic Programmable)
  • ACOK signal
  • Configurable Output Sequencing
  • Field Replacable Intelligent Fan
  • Downloadable GUI
  • Isolated 5V @ 1A Standby Output
  • Active PFC
  • EMI Conducted and Radiated to Class B
  • Optional VME Timing and System DCOK/Reset Module
  • Optional extra hold-up module
  • Field Demonstrated MTBF to 550K Hours
  • Digital monitor of Voltage, Current and Temp (Both Input and Output)
  • Programmable voltage, current limit, fan speed, Foldback or Constant Current operation
  • Optional Extended hold-up module
  • External Switching Frequency Sync Input
  • Optional Conformal Coating
  • Industrial Temp Range (-40 to 70C)
  • Industrial Shock/Vib (>50G's)
  • 3-Phase Input

让我们帮助您选择合适的产品

按要求新建搜索

Corporate website design by Freshleaf Media

Sales Support

Data protection – The information you provide on this form will be held on file by Artesyn on a database and will be used for the purposes of promotion of Artesyn products, services and other stories. By submitting this form, you consent to the use of your personal data for these purposes.

We use a tool called Mailchimp to manage our subscriber lists, so when you apply to join, you will receive an email from Mailchimp to confirm that you wish to join the Artesyn mailing list (the email will be from an address such as Artesyn Embedded Power <info@mail1.mcsignup.com>). Please click on the link in the email – this is to help us protect your privacy. You can unsubscribe at any time.

☒ Close