.svg){kind=logo}
Artesyn™
iVS3 Series
Active
1800 to 4500 W Configurable AC-DC Power Supplies
The iVS3 series is an AC input to DC output configurable power system consisting of a microprocessor-controlled PFC front end providing 14 individual slots that accept intelligent DC-DC converter modules with single, dual or triple outputs ranging from 2 V to 60 V. Single output modules come in four power ranges that can be mixed and matched and connected in parallel or series to obtain thousands of output combinations customized to any application. User-configurable functions include current limit and output sequencing, as well as input and output OK signals and indicators. Capable of delivering up to 4,500 W and with up to 42 isolated outputs, the iVS3 series carries full medical safety approvals and is an extremely flexible and versatile multi-output power solution.
These digitally controlled power supplies feature a PMBus®-compliant I2C serial interface that enables parameters such as the voltage, current limit and enable/inhibit status of individual outputs to be programmed via an intuitive user GUI. The serial interface also allows remote monitoring of voltage, current and temperature.
These digitally controlled power supplies feature a PMBus®-compliant I2C serial interface that enables parameters such as the voltage, current limit and enable/inhibit status of individual outputs to be programmed via an intuitive user GUI. The serial interface also allows remote monitoring of voltage, current and temperature.
特点
- Current Share on all outputs greater than 10A
- Field Demonstrated MTBF to 550K Hours
- Industrial Shock/Vib (>50G's)
- Industrial Temp Range (40 to 70C)
- Intelligent I2C control
- Isolated 5V @ 1A Standby Output
- Remote Sense on all outputs greater than 2A
- Input Range 90-264 VAC; 156-350 VDC
- Frequency 47-63 Hz
- Inrush Current 40A Peak (Soft Start)
- Efficiency 85% typical depending on configuration
- Power Factor 0.99 typ @ full case load
- Turn-on Time AC 1.5 sec; Inhibit 150mS
- EMI Filter CISPR 22/EN55022 Level B
- Leakage Current 500uA Max
- Radiated EMI CISPR 22/EN55022 Level B
- Holdover Storage 10 mSec min
- ACOK >5mS early warning
- Harmonic Distortion Meets EN61000-3-2
- Margining +/-4-6% of Nominal
- Programming Accuracy +/- 5%
- Factory Set Point Accuracy +/- 1%
- Adjust Range +/-10% Manual; Full Range Programmable
- Overall Regulation 0.4% or 20mV max
- Ripple RMS 0.1%; P-P 1.0% to 20MHz
- Dynamic Response <2% or 100mV, 25% load step
- Reverse Voltage Protection 100% of rated output
- Recovery Time To within 1% in <300uSec
- DCOK +/-5% of nominal - Programmable
- Remote Sense Compensates up to 0.5V
- Single Wire Parallel Share within 2% of total rated load
- Output/Output Isolation >1 Megohm, 500V
- Safety Meets EN60950 and EN60601
- Module Switching Frequency 250kHz accepts external sync signal
益处
- ACOK signal
- Active PFC
- Configurable Output Sequencing
- Digital monitor of Voltage, Current and Temp (Both Input and Output)
- Downloadable GUI
- EMI Conducted and Radiated to Class B
- External Switching Frequency Sync Input
- Field Replacable Intelligent Fan
- Full Medical Approval
- Global DCOK and Inhibit/Enable (Logic Programmable)
- Margin and Remote Voltage Programming
- Module DCOK and Inhibit (Logic Programmable)
- Optional Conformal Coating
- Optional Extended holdup module
- Optional extra holdup module
- Optional VME Timing and System DCOK/Reset Module
- Overload Protection on all outputs
- Programmable voltage, current limit, fan speed, Foldback or Constant Current operation
- Voltage Adjustment on all outputs (Manual or Programmable)
- OVP Programmable
- OCP Programmable
- Thermal Protection OTP/OTW Programmable
规格
| 输出功率（瓦）: | 4500 |
|---|---|
| 长度（英寸）: | 11 |
| 宽度（英寸）: | 8 |
| 高度（英寸）: | 5 |
| 安装类型: | Configurable |
| 最小输出电流 (A): | 0 |
| 最大输出电流 (A): | 970 |
| 输出电压范围 (V): | 2V to 60V |
介绍 ConfigPro
先进能源公司革命性的在线电力配置器
该电源解决方案算法拥有 300 多万种可配置电源组合，可优化成本并指导您找到 MP、IMP、IVS 和 MICROMP (UMP) 可配置电源系列的理想解决方案。
开始
技术文档
配件
iVS Software Package
The iVS software is designed to make the iVS Power Supply Unit (PSU) accessible to the user. It is intended to provide information gathered from the PSU and interactive controls to the basic capabilities of iVS power supply.
