SIL60C2 Series

240 Watt (60 Amp) Non-Isolated DC-DC Converters

The SIL60C2 series 60 amp non-isolated DC-DC converter is designed for cost- and space-sensitive applications. It is available in a through-hole vertically mounting configuration with dual rows of pins. The converter accepts a wide range 4.5 to 13.8 Vdc input and provides an output that is adjustable from 0.8 to 4.0 Vdc to accommodate a wide variety of silicon power needs. Rated at 240 watts, the SIL60C2 is capable of delivering up to 60 amps; it has a typical efficiency of 89% and no minimum load requirement. Standard features include differential remote sense, remote On/Off and remote ‘power good’ indication. This converter also supports phase shedding to save power under light load conditions, and its output voltage can be adjusted to within 1% by a 2-bit VID signal.

技术数据表 技术文档 打印此页
  • 最大总功率:
    240 W
  • 最大总电流:
    60 A
  • 输入电压:
    4.5 V to 13.8 V
  • 输出电压:
    0.8 V 至 4 V
  • 输出路数:
  • 尺寸(长 x 宽 x 高):
    1.980" x 0.780" x 0.540"
  • 保修期
    2 years
  • 工作温度:
    0 to +70°C

Electrical Specifications

  • Input
  • Output
  • Input range: 4.5 -13.8 V
  • Output current: 60 A
  • Output voltage: 0.8 - 4.0 V
  • Ripple and noise: < 40 mV typical
  • 2 bit VID adjustable output voltage
  • Phase shedding for power saving during light loads
  • High power density design means reduced board space requirement
  • Power good output signal
  • Operating ambient temp up to +70°C with suitable derating and forced air cooling
  • Remote ON/OFF (active high)
  • 0 A minimum load
  • Input under-voltage lockout
  • EU directive 2002/95/EC compliant for RoHS

让我们帮助您选择合适的产品

按要求新建搜索

Corporate website design by Freshleaf Media

Sales Support

Data protection – The information you provide on this form will be held on file by Artesyn on a database and will be used for the purposes of promotion of Artesyn products, services and other stories. By submitting this form, you consent to the use of your personal data for these purposes.

We use a tool called Mailchimp to manage our subscriber lists, so when you apply to join, you will receive an email from Mailchimp to confirm that you wish to join the Artesyn mailing list (the email will be from an address such as Artesyn Embedded Power <info@mail1.mcsignup.com>). Please click on the link in the email – this is to help us protect your privacy. You can unsubscribe at any time.

☒ Close