PTH05050 Series

21.6 Watt (6 Amp) Non-Isolated DC-DC Converters

The PTH05050 series non-isolated DC-DC converter complies with the Point-of-Load Alliance (POLA) standard. It offers some of the most advanced POL functions in the industry, including Auto-Track™ sequencing for controlled power-up/power-down of complex semiconductor devices such as DSPs, FPGAs and ASICs. Standard features include pre-bias startup, input undervoltage lockout, remote sense, remote On/Off and auto resetting short-circuit protection.

PTH05050 series converters have an input voltage range of 4.5 to 5.5 Vdc and an output voltage that can be trimmed from 0.8 to 3.6 Vdc to meet a wide variety of semiconductor power needs. Rated at 21.6 watts, the converters offer up to 95% efficiency and can deliver up to 6 amps. Available in through-hole horizontal mount and surface-mount versions, they have a small 0.5 x 0.87 inch (12.7 x 22.1 mm) footprint and an installed height of just 0.33 inch (8.5 mm).

Auto-Track™ is a trademark of Texas Instruments

技术数据表 技术文档 打印此页
  • 最大总功率:
    21.6 W
  • 最大总电流:
    6 A
  • 输入电压:
    4.5 V to 5.5 V
  • 输出电压:
    0.8 V 至 3.6 V
  • 输出路数:
    Single
  • 尺寸(长 x 宽 x 高):
    0.870" x 0.495" x 0.335"
  • 保修期
    2 years
  • 工作温度:
    -40°C to +85°C
  • Auto-Track pin for output sequencing
  • Surface Mount (S or Z suffix) or Through-Hole (H or D suffix) termination
  • Adjustable output from 0.8 to 3.6 V through External Trim Resistor
  • Margin Up/Down pins
  • Output Sense
  • Output Enable pin

让我们帮助您选择合适的产品

按要求新建搜索

Sales Support
☒ Close