AIT02ZPFC Series

Three Quarter Brick PFC Modules

The AIT02ZPFC series three-quarter-brick power factor correction module accepts a wide 85–264 Vac input and presents a unity power factor. It accommodates AC supply frequencies of 50 Hz, 60 Hz or 360–800 Hz. Rated at 720 watts, the module offers a conversion efficiency of up to 93% and provides a typical output voltage of 393 Vdc.

Based on an encapsulated design that incorporates a thermal baseplate, the AIT02ZPFC series PFC module accommodates a baseplate operating temperature range of -20 to 100˚C and can start up from temperatures as low as -40˚C. The module has an industry-standard 2.4 x 3.5 inch (61 x 88.9 mm) footprint and an installed height of only 0.54 inch (13.9 mm).

Artesyn Embedded Power’ AIT02ZPFC series PFC modules comply with the RTCA-DO-160 avionics standard and the IEC1000-3-2 harmonics emission standard.

技术数据表 技术文档 打印此页
  • 最大总功率:
    720 W
  • 最大总电流:
    2.1 A
  • 输入电压:
    85 V to 264 V
  • 输出电压:
    393 V 至 393 V
  • 输出路数:
    Single
  • 尺寸(长 x 宽 x 高):
    3.500" x 2.400" x 0.550"
  • 保修期
    1 year
  • 工作温度:
    -20°C to +100°C
  • Unity power factor
  • High efficiency - up to 93%
  • Universal input voltage and frequency range
  • Negative enable function
  • IEC1000-3-2 compliance at 50Hz and 800Hz input
  • Enable output to control DCDC Converter
  • Internal active switch bypassing external inrush current
  • Up to 720 W output power
  • TRCA-DO-160D harmonic compliant at 115Vac input full load
  • 100°C baseplate operating temperature

让我们帮助您选择合适的产品

按要求新建搜索

Sales Support
☒ Close